Remove all debris and obstructions in way of repair areas. Lay down tarps and dig down to footing by hand in specified repair areas. Repair all cracks and masonry voids in foundation wall below grade. Prime wall and apply rubberized membrane to repair area. Add a layer of mastic mesh, another layer of rubberized membrane, a layer of 12m plastic and fasten drainage board to grade with termination straps and concrete anchors. Backfill and power tamp dirt.
On interior, break open existing concrete floor and excavate sump basin at a dimension of approximately 2.5ft x 2.5ft x 3ft. Line perimeter of basin with filter cloth and drill 1/2” holes around complete perimeter of basin. Install basin and surround with 3/4“ clear gravel.
Install a 1/3hp oil cooled sump pump and connect pump exhaust line. Connect fresh weeping tile system to sump basin. Reinstall concrete floor. Remove and dump all debris. All labour and materials are included.
